手机彩票网体育彩票

Product features of Shiyan supply forced circulation evaporation mold

Release time: 2020-02-08 05:06:53

The horizontal intelligent crystallizer adopts a dedicated crystallization curve process control system to meet the requirements of different material crystallization processes for different cooling rates. The horizontal crystallizer consists of two sets of internal and external cooling circulation systems. The heat transfer surface is composed of a shell jacket and a coil tube that rotates with the shaft. The main shaft uses a hollow shaft to increase the heat exchange area. The crystallizer is equipped with a spiral belt stirrer and an end-face scraping plate, which has a compact structure and stable performance. By intelligently controlling the appropriate deceleration curve, the rapid scarring of the heat exchange surface can be effectively suppressed, and the supersaturation of the material in the crystallizer is strictly controlled to avoid excessive saturation and excessive nucleation caused by excessive cooling speed.

Distilled water tank container insulation material uses high temperature resistant, anti-aging polyurethane foam or pearl cotton.

Multi-media filters (also known as mechanical filters) use one or more filter media to pass high-turbidity water through a granular or non-granular material with a certain thickness under a certain pressure, thereby effectively removing suspended impurities so that In the process of water clarification, commonly used filter materials are quartz sand, anthracite, manganese sand, etc., which are mainly used for water treatment to remove turbidity, soften water, and pre-treatment of pure water.

The shaft seal adopts a sanitary cemented carbide and silicon carbide 204 balanced mechanical seal, which is wear-resistant and pressure-resistant. The speed of the reducer is 60-82 rpm. Frequency converter can also be used to adjust the speed.

An MVR concentrator evaporates 72 tons of water per day and runs for 300 days a year. The annual amount of evaporated water is 21,600 tons per year, which can save 2.147 million yuan per year.

The factors that affect the price of multi-effect evaporators have never been more than a single reason. Hubei evaporator manufacturers have summarized the five major factors that affect the price of multi-effect evaporators: solution characteristics, evaporation area, pH value, material, evaporation process evaporation Device manufacturers.

The mouth of the distilled water storage tank is provided with a liquid level gauge (static pressure, capacitive, non-contact, ultrasonic, glass tube type), air respirator, thermometer (digital display or dial type), CIP cleaning port, SIP sterilization port, liquid inlet and outlet and sanitary manhole.

When installing a complete set of evaporation equipment, install it separately according to the equipment. (1) Installation instructions for heating chamber: First, heat the heating chamber and the separation chamber one by one, lift it up and down gently, the verticality according to the requirements on the equipment diagram. Before the equipment is installed, it should be placed horizontally and sleepers. Lift the equipment gently during lifting to avoid excessive vibration of the tube bundle to damage the nozzle and surface of the equipment. Do not open the package of each takeover package on the device to prevent other hard objects from falling into the heat exchange tubes inside the device. Place the four ears on the corresponding embedded iron plate, and observe the hanging wire to ensure that it is placed vertically.

The water inlet conditions of the MVR evaporator affect the process parameters of the MVR evaporator. When designing the MVR evaporator scheme, we generally ask customers to provide the water quality of the industry being processed. The water inlet conditions of the MVR evaporator affect the design of the process parameters of the MVR evaporator complete set of equipment.

If the design main is to optimize the design of the heat transfer part of the vacuum thin film evaporator, aiming at the heat transfer process of the material in the thin film evaporator, and the influence of parameters on the heat transfer efficiency of the thin film evaporator, the optimal design of the thin film evaporator is to improve the product quality. Sex. The feed temperature has a great influence on the heat transfer part of the thin film evaporator. The thin film evaporator is the same as the other evaporators. If the heat is mainly used to vaporize latent heat, the material may be fed near the boiling point, which can be compared with the correct fraud heat transfer area. .

彩53彩票网 万人炸金花 新橙彩票 电子游戏 360彩票 中国福彩网 一定牛彩票网 精选四肖三码 白小姐四肖必选一肖四不像 六肖中特精选

(function(){ var canonicalURL, curProtocol; //Get the tag var x=document.getElementsByTagName("link"); //Find the last canonical URL if(x.length > 0){ for (i=0;i